DIY Electroless Copper Plating – Palladium Acid Solution – Hindi – Part 1

DIY Electroless Copper Plating – Palladium Acid Solution – Hindi – Part 1


Welcome friends In this video, I am going to show you How to prepare
Palladium Chloride & HCl Acid Solution We shall use it in next video
to prepare Tin-Pd Complex Activator You need, 0.5g PdCl2
You may purchase 1.0g for future use. 50ml HCl (34%) Weigh 0.5g (500mg) PdCl2 Put it into, Plastic or Glass container Take 50ml HCl acid in beaker Measure 10ml HCl Dissolve PdCl2 in HCl Mix them well Add 10ml HCl again
Now total HCl is 20ml Add 10ml HCl again
Now total HCl is 30ml Add 10ml HCl again
Now total HCl is 40ml Add 10ml HCl again
Now total HCl is 50ml Use glass rod to dissolve remaining particles You may use hot water bath for heating
to dissolve PdCl2 completely But be careful from emitting Chlorine Gas
it has a potential to suffocate and choke you Take empty Plastic or Glass bottle to store
the solution. You must use dark coloured bottle. Now our solution is ready.
It is sufficient to prepare 10-50 Litres Pd-Sn Activator.

7 Comments

  1. Dear Sir,
    Thanks a lot for sharing such a valuable video. Can you please provide some information about shelf life of this product? How long we can store it and how many times we can reuse this?

Leave a Reply

Your email address will not be published.


*