Flush Cutting Copper Pipes: Dremel Multi-Max

Flush Cutting Copper Pipes: Dremel Multi-Max


Flush Cutting Copper Pipe In many remodeling projects old pipes
often get in a way and need to be flush cut to the wall. To demonstrate this we’ll fit the Dremel
Multi-Max oscillating tool with an MM4w2 Wood and Metal cutting
blade. Begin by inserting the wood and metal
cutting blade into the tool. TIghten the screw with the allen
wrench to secure the blade in the holder. Plug the tool in and set the tool to
its maximum speed. Keeping the blade flat to the surface
it’s important not to force them to tool during the plunge cut. If you experience a strong vibration in
your hand during the plunge cut This indicates that your applying too much
pressure back the tool out and let the speed of the tool do the
work. Push the tool way from you in a forward motion through the pipe until
the cut is complete. Using the correct technique the Dremel
Multi-Max and the wood and metal cutting blade produces a true flush cut in
non-ferrous metals that can cut a copper pipe up to 3 quarters of an inch in
diameter.

Be the first to comment

Leave a Reply

Your email address will not be published.


*