Vanity Bracelet Handmade by Mariel

Vanity Bracelet Handmade by Mariel


Hi Welcome to MarielBeadsandBeyond Today I’m going to show you have to make this beautiful bracelet It is really pretty and it’s really easy to make the list of materials it’s going to be available in the description box As well as the link to buy the PDF if you would like to buy the PDF Some of these beads are available at MarielBeadsandBeyond .com as well as the clasp These clasps are two strand gold filled So I hope you guys enjoy this tutorial Lets get started To start you are going to thread your needle and you are going to pick up four 8/0s You are going to bring them down and you are going to leave Six to ten Inches thread tail to add your clasp We are going to sew through all four beads and we are going to reinforce Sew through all four again and for this particular bracelet you want to reinforce and you want to make sure your beads as straight as you can so this is what you should have we are going to sew through one more 8/0 we are going to pick up three 8/0s our thread is exiting from this side of the 8/0 We are going to sew through the same 8/0 and we are going to reinforce we are going to sew through two more and we are going to repeat the the previous step pick up three 8/0s sew through the same bead that your thread is exiting from and reinforce sew through one more pick up three 8/0s sew through the same 8/0 that your thread is exiting from reinforce reinforce to three more one two three we are going to sew through the next 8/0 on the second box we are going to pick up two 8/0s we are going to sew through this 8/0 through the 8/0 that our thread was exiting from and we are going to reinforce and we are going to sew through one more pick up two 8/0s sew through the first one to the right on the last box reinforce and we are in position to repeat the same steps you are going to continue repeating these steps until you get the desire length for a six inches bracelet you are going to 34 rows ofneed right angle weave and then for every half and inch you are going to need to add three more rows continue and I will be right back to show you the next step our thread is exiting form this Seed bead we are going to sew through the first edge seedbead we are going to pick up a half tila and we are going to sew though the next edge bead we are going to pick up one half tila and we are going to sew through the next edge seedbead and we are going to continue this step throughout the row go ahead and add half tilas all the way around and do not tighten your thread to much we need to be able to move the half tilas with the thread tail you are going to pass it next through the 8/0 so you don’t have issues later I’m going to pick up my last tila I’m going to sew through the las 8/0 pick up twi 15/0s sew through the next 8/0 pick up one 15/0 sew through the next 8/0 pick up one sew through the next edge seed beads pick up two 15/0s we are going to sew through the first edge seedbead on the other side Pick up one half tila and we are going to add them all the way around continue and I’ll be right back to show you the next step I’m done adding my half tilas so what I’m going to do next it’s add my 15/0s the same way that you added them on the other side and we are going to reinforce so what you want to do is sew all the way around but we don’t want to tighten our thread you want to pass your thread but without pulling to tight we are going to sew through the 8/0s through the tilas and continue all the way around and I’ll be right back to show you how to continue you are going to sew all the way around, and you want to be exiting from this 8/0 make sure that you are not skipping any beads I’ve reinforced all the way around so our thread is exiting from this 8/0 we are going to sew though the two 15/0s the 8/0 the 15/0 the 8/0 and the 15/0 you want your thread to be exiting from this 15/0 grab the clasp and you are going to sew through the loop we are going to pick up six 15/0s we are going to sew through the second loop and we are going to sew back through the 15/0 the 8/0 and the 15/0 we are going to reinforce several times and if you want to you can sew this way around to reinforce or you can sew up through the 15/0s though the clasp and reinforce go ahead and reinforce and I’ll be right back to show you the next step sew through the 15/0s through one 8/0 and through the half tila we are going to reverse direction through the open hole of the half tila we are going to pick up one 15/0 one four mm and one 15/0 we are going to sew through the Half tila on the opposite side (left top hole) this is our left we are going to sew through the top hole pick up one 15/0 and sew back through the bicone pick up one 15/0 sew through the Half tila on the opposite side (from left to right) and we are going to reinforce you want to make sure that your bicone is centered we are going to sew down in a reverse direction through the bottom hole of the tila through the 8/ and through the next half tila reverse direction through the open hole and repeat the same steps pick up one 15/0 one four mm and one 15/0 and sew through the half tila across (left top hole) pick up one 15/0 and sew back throuhgthe bicone pick up one 15/0 and make sure your bicone is centered continue repeating these steps throughout the row go ahead and add the clasp on the other side and I’ll be right back to show you my bracelet I hope that you guys like this tutorial I’m going to have the PDF available also don’t forget to visit my website Marielbeadsandbeyond.com and I hope that you guys enjoy it

5 Comments

  1. This bracelet is beautiful. Thank you for sharing it. I was interested in buying a PDF pattern but I don’t see it on your website nor do I see it on your Etsy shop. Please advise.

Leave a Reply

Your email address will not be published.


*